Installation Guide

INSTALLATION SHEET
493118
19054 28th Avenue Surrey, BC Canada V3S 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W
20190117
: kuzcolighting.com
LED Pendant
START FROM HERE
• Make sure power is completely off at the fuse box.
• Have your fixture installed by a qualified licensed electrician
•
Prepare everything in a clear area.
• Wear gloves at all times during this installation.
• Read instructions carefully before you start assembly.
• Keep this instruction sheet for future reference.
Technical Support: 1-855-855-8926
1a.
1b.
1c.
1e.
1d.
2a.
2b.
2c.
1.
2.
3.
Remove the fixture from its original packaging. Next, remove
the mounting plate (1c) from the canopy (2a) by removing
the decorative nuts (2b). Attach the mounting plate (1c) to
the electical junction box (1a) using the two screws (1d)
provided in the hardware package. Connect all wires (1b)
correctly black to black “L”, white to white “N” and the ground
wire with provided marrettes from the hardware package.
Before you mount the canopy to the mounting plate, secure
the fixture (2c) to the canopy (2a). You are now ready to
mount the canopy (2a) to the mounting plate (1c). Align the
threaded studs (1e) with the holes on the surface of the
canopy (2a). Next, push the canopy (2a) up towards the
mounting plate (1c) and thread on the decorative nuts (2b)
on the threaded studs (1e). This will secure the canopy to the
mounting plate.
Install the bulb (bulb not included) to the fixture.You have now
completed the installation of your fixture, enjoy.