Installation Guide

INSTALLATION SHEET
WS13760
START FROM HERE
Make sure power is completely off at the fuse box.
Have your fixture installed by a qualified licensed electrician
Prepare everything in a clear area.
Wear gloves at all times during this installation.
Read instructions carefully before you start assembly.
Keep this instruction sheet for future reference.
Technical Support: 1-855-855-8926
LED Vanity
1.
2.
3.
Remove the fixture from its original packaging. Next,
remove the mounting plate (1c) from the canopy (2b)
by removing the screws (2a). Secure the mounting
plate (1c) to the electrical junction box (1a) (through
backplate (1e),in case of illustration-2 ) with screws
(1d) provided in the hardware package.
You are now ready to mount the canopy to the
mounting bar. First connect all wires (1b) correctly
black to black “L”, white to white “N” and the ground
wire with provided marrettes from the hardware
package. Attach the canopy (2b) to mounting plate
(1c) and secure with screws (2a)
You have now completed the installation of your
fixture, enjoy.
19054 28th Avenue Surrey, BC Canada V3S 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
1b.
1c. 1d.
2a. 2b.
1a.
1b.
1c.
1e.
1d.
2a. 2b.
1a.
Illustration-1
Illustration-2
20181121
Please Note:
• For dimming, a TRIAC type of dimmer is required.

Summary of content (1 pages)