Installation Guide

3a.
3b.
3c.
3d.
4a.
5a.
INSTALLATION SHEET
PD57508
Incandescent Pendant
START FROM HERE
19054 28th Avenue Surrey, BC Canada V3Z 6M3
T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196
W: kuzcolighting.com
Please Note:
• 120V input
• Make sure POWER is COMPLETELY OFF at the fuse box
• Have your fixture installed by a qualified licensed electrician
• Prepare everything in a clear area
• Wear gloves at all times during this installation
• Read instructions carefully before you start assembly
• Keep this installation sheet for future reference
Technical Support: 1-855-855-8926
20230109
1.
2.
3.
4.
5.
6.
7.
8.
Remove fixture from its original package
Separate mounting plate (1c) from canopy (2a) by
removing canopy screws (2b)
Attach mounting plate (1c) to electrical junction box
(1a) using junction box screws provided (1e) in
hardware package
To change fixture height, shorten or lengthen wire by
removing screw (2c) from wire lock (5b) and push or
pull wire to your desired length. Secure screw (2c) in
wire lock (5b) to lock wire in place and place wire lock
(5b) inside canopy (2a).
Make proper electrical connections (black to hot “L”,
white to neutral “N”, ground to “GND”) with wire
nuts (1b) provided in hardware package
Attach canopy (2a) to mounting plate (1c) with canopy
screws (2b)
Attach shade (3b) to fixture (3a) and secure with
washer (3c) and shade connector (3d) using wrench
(5a)
Insert bulb (4a) into fixture socket
1a.
1b.
1c.
1e.
5b.
2b.
2a.
2c.

Summary of content (1 pages)