User Manual

Unpacking
Unpack the SAC2 and check to see if there is
any damage to it. If you find any damage
notify your supplier immediately. Only the
consignee may institute a claim with the
carrier for any damage incurred during ship-
ping. Be sure to save the carton and all packa-
ging materials for the carrier’s inspection.
Should you ever need to ship the unit, only
use the original factory packaging. If the
shipping carton is unavailable, contact your
supplier to obtain a replacement.
The SAC2 carton should contain:
s3!#3UPER!NALOGUE#ONTROLLER
s5SER'UIDE
s)%#0OWER#ABLE
Rack mounting
The SAC2 will mount in a standard 19” rack
system. Use four screws and washers to
mount the SAC2 to the rack rails. We recom-
mend using a shock-mounted rack for touring
use to prolong the life of your SAC2.
To prevent accidental adjustment of settings,
or unwanted tampering in a fixed installation,
KV2 Audio provide an additional security
panel.
AC Power requirements
The SAC2 USESASTANDARD)%#POLE!#
connector.
4HE3!#OPERATESINEITHER6OR6
mode. This setup is preconfigured at the
factory.
Getting started
AUTION
!
Voltage requirements
The SAC2 operates safely and without audio
discontinuity if the AC voltage stays within the
OPERATINGWINDOWOF66IN6
MODEOR66WHENWORKINGIN6
MODEATOR(Z
Input Output
12
3
21
3
1 = Ground
2 = Hot (+)
3 = Cold (-)
Connector wiring
XLR Balanced Input and Output connectors
CAUTION:
)FTHE/N,%$DOESNOTILLUMINATE
or the system does not respond to
audio input remove AC power
immediately. Verify that the
voltage is within the proper
range. If the problem persists,
please contact KV2 Audio or an
AUTHORIZEDSERVICECENTER
!
CAUTION
CAUTION:
If it is necessary to convert balan-
ced output to unbalanced, it is
IMPOSSIBLETOSHORT(OTOR
#OLDPINSWITH'ROUND)N
THISEVENTTHE,INE$RIVERSWILL
cause permanent disconnection.
!
CAUTION
0Age | 