VHD Flyware Suspension & Rigging t Introduction VHD2.16 t Safety Warning t Parts & Components VHD2.16 t Weights & Strengths t Configurations The future of sound. Made perfectly clear. At KV2 Audio our vision is to constantly develop technologies that eliminate distortion and loss of information providing a true dynamic representation of the source. Our aim is to create audio products that absorb you, place you within the performance and deliver a listening experience beyond expectation. VHD 2.
Contents 3 Introduction 4 Warning 4 Parts & Components 5 Description 6 Weights & Strengths 8 Configurations 9 Configurations with Down Fill 10 Contents Contents VHD Flybar Contents 3
Introduction VHD Flybar Introduction This manual is presented by KV2 Audio, to enable the clear and precise instructions for the safe practice and execution, suspension and general rigging of the VHD Loudspeaker products, using the VHD FLYBAR system. It is vitally important that operators and users familiarize themselves with all of the components, parts, products and safety instructions, as described and indicated within this document, before attempting any over-head suspension, flying and rigging.
Parts & Components The VHD FLYBAR is a complete system to allow the safe suspension of single, double and multiple components of the VHD series.
Description VHD Flybar Description FLY BAR - 0003 (KVV 987 252): The CROSSMEMBER hanging bracket is a flat and folded steel bar with returned 90 degree ends. This bracket attaches to the PICKPOINT ARM by simply sliding into two preset grooves, from left to right and secures smoothly and tightly, thus creating a T- Bar effect.
Description VHD BASS ARM (KVV 987 307): The VHD BASS ARM is a flat steel bar with straight ends, a double groove joint at the lower end and prefixed apertures to accept both D6 & D12.6 QUICK RELEASE PINS. This bar is used exclusively to suspend a compliment of two VHD Subwoofers and a single bar is used on each side of the two enclosures.
Weights & Stregths Weights & Strengths VHD Flybar The ES Flybar System presents several configurations of system design product combinations for suspension and rigging. Each component has to be factored into the total weight being suspended. PART WEIGHT PER UNIT CROSSMEMBER - Hanging Bracket (part of KVV 987 309) 5,5 kg (12.13lbs) PICKPOINT - Hanging Arm with Fixation Chain 6 kg (13.23lbs) VHD2.0 TOP ARM (pair), (KVV 987 309) 6,5 kg (14.33lbs) VHD2.
KVV 987 309 WHITE MARKING CONFIGURATION - A,J,K WHITE MARK KVV 987 307 RED MARKING CONFIGURATION - C,L,N,O RED MARK Configurations VHD2.15(16) YELLOW MARKING CONFIGURATION - B YELLOW MARK KVV 987 309 KVV 987 306 VHD2.15(16) KVV 987 252 GREEN MARK KVV 987 306 KVV 987 307 GREEN MARKING CONFIGURATION - D,E,M VHD2.15(16) VHD2.15(16) KVV 987 252 GREEN MARK KVV 987 309 GREEN MARK VHD2.15(16) VHD2.15(16) VHD2.15(16) VHD2.15(16) KVV 987 252 VHD Flybar END CONFIGURATION - F VHD2.
WHITE MARKING CONFIGURATION - A,J,K KVV 987 309 WHITE MARK YELLOW MARKING CONFIGURATION - B KVV 987 310 KVV 987 309 KVV 987 310 WHITE MARK RED MARKING CONFIGURATION - C,L,N,O RED MARK KVV 987 309 KVV 987 306 KVV 987 310 GREEN MARK KVV 987 307 GREEN MARKING CONFIGURATION - D,E,M VHD2.15(16) VHD2.
The future of sound. Made perfectly clear. At KV2 Audio our vision is to constantly develop technologies that eliminate distortion and loss of information providing a true dynamic representation of the source. Our aim is to create audio products that absorb you, place you within the performance and deliver a listening experience beyond expectation. KV2 Audio, Nádražní 936, 399 01 Milevsko, Czech Republic T +44(0)1423 816868 F +44(0)1423 816869 www.kv2audio.
