Datasheet

Kvaser Leaf Light v2 User’s Guide 11 (18)
4.2 CAN connectors
Kvaser Leaf Light v2 devices that uses the 9-pin D-SUB connector (see Figure 5)
has the pinning described in Table 4.
Figure 5: The D-SUB connector pin numbers
D-SUB pin number Function
1 Not connected
2 CAN_L
3 GND
4 Not connected
5 Shield
6 Not connected.
7 CAN_H
8 Not connected.
9 Not connected.
Table 4: Configuration of the 9-pin DSUB
Kvaser Leaf Light v2 devices that uses the 16-pin OBDII plug (see Figure 6) has
the pinning described in Table 5.
Figure 6: OBDII Connector
OBDII pin number Function
4 GND
6 CAN_H
14 CAN_L
16 Not connected.
Table 5: OBDII pin configuration (showing only connected pins)
Kvaser AB, Mölndal, Sweden — www.kvaser.com