User manual

6. Remove the eight screws securing the radome to
the baseplate. Carefully lift the radome straight up
until clear of the antenna assembly and set it aside
in a safe place. If you bring the radome topside, secure
it with a lanyard to prevent it from falling overboard.
7. Remove the tie-wrap securing the MCU/kitpack
box to the antenna baseplate. Remove the box.
8. Unfasten the tie-wrap securing the antenna frame
to the sensor bracket (release the tab using a flat-head
screwdriver). Save the tie-wrap in case the antenna
needs to be reshipped someday.
9. Inspect the antenna unit for any signs of shipping
damage.
Installation
54-0198
27
Figure 2-4
MCU/Kitpack Box
Figure 2-5
Antenna Frame Shipping Restraint
Tie-wrap
Tie-wrap
Sensor
Bracket
Frame