Instruction Manual

Misprints, errors and technical changes reserved
power plug
12V 2A
DVI in from PC
USB to PC
DVI out to Monitor
power plug
12-24 VDC
USB from Keyboard and Mouse
Network cable CAT 5e/6/7 up to 150m/492ft
DVI to Monitor
KVM-TEC Smartline Local / PC
DC PC
In
PC
USB
KVM-Link
Monitor
Out
Quick Installation SVX1 SMARTLINE local / CPU – remote / CON
1. Connect the CON / Remote and the CPU / Local Unit to the included 12V 2A power supply.
2. Now connect the USB cable to a USB port on your PC and connect the other end of the USB cable to the CPU /
Local Unit. Connect keyboard and mouse to the CON / Remote Unit.
3. Connect the CPU / Local and the CON / Remote Unit with a network cable.
4. Now connect the DVI cable to the DVI socket of the PC and the other end to the DVI socket of the CPU / Local
Unit (PC-in). Then connect the monitor with the DVI cable to the CON / Remote Unit.
HAVE FUN - your kvm-tec Extender is now in use for many years (MTBF approx 10 years)