Instructions

Misprints, errors and technical changes reserved
VIEWING THE FIRMWARE VERSION
Under „A“ - About the currently installed  rmware version of the remote (CON) and local
(CPU) Extender is displayed (e.g. ‚4267‘)
FEATURES MENÜ
Features Menu
P Point to Point Mode Enabled/Disabled
(Point to Point Point to Point excludes itself
with Matrix mode
M Matrix Switching Mode Disabled/Enabled
D Freeze last Image (Disabled)Disabled/Enabled
E USB Emulation Mode (Disabled ) Disabled/Enabled
S USB Save Feature (mass storage usable) Disabled/Enabled
O Power Redundance Alert Alert System
C Diagnosis Diagnosis menu
U Unlock Features Unlock Features
L Link redundancy redundant Link for local Units
I IP Management IP Management
POINT TO POINT
You can switch the Point to Point mode on and off by pressing the „P“ key
ATTENTION - if the point to point mode is activated, the switching mode cannot be activated
MATRIX SWITCHING MODE
By pressing the „M“ button you can switch the Matrix Switching Mode off and on
KVM-TEC
Gewerbepark
Mitterfeld 1 A
2523 Tattendorf
Austria
www.kvm-tec.com
IHSE USA LLC
1 Corp.Dr.Suite
Cranburry NJ 08512
USA
www.ihseusa.com
IHSE GMBH Asia
158Kallang
Way,#07-13A
349245 Singapore
www.ihse.com
IHSE China Co.,Ltd
Room 814
Building 3, Kezhu Road
Guangzhou PRC
www.ihse.com.cn
IHSE GmbH
Benzstr.1
88094 Oberteuringen
Germany
www.ihse.com