Deadbolt Installation Guide

24
If needed, the door handing process can be initiated manually.
This is useful if the lock is being moved to a dierent door.
1. Remove battery
pack.
3. Press the
Program button
once more.
2. Press and HOLD
the Program
button while
reinserting the
battery pack.
Release the
Program button
after 3 seconds.
The status LED
will flash red
and green.
4. The latch bolt will extend and
retract to learn the orientation
of the door. The LED will flash
green if handing is successful or
red if handing is unsuccessful.
Manual Door Handing
Status
LED