Deadbolt Installation Guide

25
1. Press and HOLD “A”
for 10 seconds. You will
hear 1 short beep and
see an amber LED
Note: After 3 seconds,
you will hear 1 short
beep and see a blue
LED. You should
continue to hold
“A” to enter network
reset mode.
3. Press and release
the Program button
to confirm network
reset.
The Program button
must be pressed
within 10 seconds
of releasing “A” or
the function will
time out.
2. Release “A.”
You will see a
blinking amber
LED to indicate
it is in network
reset mode.
4. If successful, you will hear 1 long
beep and see a green LED. If
unsuccessful, you will hear 5 rapid
beeps and see a blinking red LED.
If unsuccessful, repeat from step 1.
Network Reset will delete all Wi-Fi settings, Bluetooth pairings,
user associations, and remove the lock from the account.
Network Reset
Status
LED
10s
Successful: Unsuccessful:
Green
LED
Red
LED