68559-001 Revoke Thickset Parts in the box Latch Interior Assembly Traditions | Temporary. Exterior Touchscreen Tracheotomy SMART CODE £8 TOUCHSCREEN ELECTRONIC BEDROLL Bis not included if beaded.
H Install the exterior keypad oy # | Whats the diameter of the hole in the door? © | install exterior keypad and mounting plate. Diameter is 21/8" Diameter is (54mm) © Gs mm) 218 nr 54mm 38mm “DB Is required for installation, “D* Is not beaded for Install 0” on “F. installation. Discard “D'. Route cable through oR, "center hole, then push Fo cable Into bottom hole. Insert key and test latch. If latch does not extend or retract smoothly, # | Locate screws for step 3C and keep them within reach.
a Add user codes (16 max) Programming Tenacity During programming. # the eraser (3 not pressed for 20 second, the system will time out Dedicated iy three baas and the "x pattern flashily thees tines), and you will neat to restart tha procedure. £ | Make sure the doors B Press check mark € Intercourse Total iF | Press lock symbol enc. ‘open. Press the Program symbol once. of 16 user codes may Button once. he programmed. Each user code must bea unique code between 4.and 8 digits.
Reference Guide Smart Code at a Glance Exterior Interior (cover removed) Re-key the lock (if needed) oO Re-key the lock forthwith your existing key. See the supplied Smart Key @ Reinstall battery pack. Back Re key Instructions panel for more Information. Touchscreen Program Check mark Lock button Switch ‘symbol symbol Itches Status LED Smart Key Key way Turntable tool hole shaft Note: When the cover is removed, preternatural shaft can ba sad to manually lock and unlock the door.
