66074-002 Rev 03 Z-Wave® Plus = = HOME CONNECT" Thickset SMART CODE £53 TOUCHSCREEN ELECTRONIC DEADBOLT Installation and User Guide Required tools Thickset Technical Support 1-866-863-6584 wwwikwiksetcom em Ruler Phillips head screwdriver ‘Additional Tools {depending on application) = Crown Parts in the box Latch Interior Assembly Exterior Touchscreen A Teds Contemporary Donatello 2 ™ "| hoot [4 | * Punsncuiedlinedad Fontanel Kieth in order i ac or Bowie Fasteners Strike Keys 08808 45780 Adapter Mounting Sm
H Install the exterior touchscreen A Whats the diameter of the hole in the door? © Install exterior touchscreen and mounting plate. Diameter is 21/8" Diameter is (54mm) Gs mm) “D*” Is required for installation. “D” Is not needed for Install “D” on *F". installation. Discard “D". fable goes ‘Route cable through undermost latch center hole, then push S D = cable Into bottom hole. . Amp allegretto acidosis Insert key and test latch.
a Add the lock to your smart home system A | Initiate the process to add B the lock to your system at your smart home controller. Refer to your smart home system Instructions for mare information. KH Add user codes 30 max) ‘Her pro minted by our smart home stent to add the lock; press button "A" on the lock interior one ime: The red LED wi Inseminate when the lock enters Add Mode. Please allow time for the controller to add the lock, If successful, rename the lock hy our system Gt applicable).
Reference Guide Smart Code at a Glance System Alerts Exterior Interior (cover removed) Display Alert Reason Solution “X" pattern Rashes one time — ith one beep. ‘One income ct code entered. Re-ratter code. Touchscreen — Button-* No user code programmed. Program at least one user code. “X" pattern flashes threat Programming timeout lefter 20 times with three beeps”. seconds. Attempt programming procedure again. Check mark Lock Unsuccessful programming.