66979-001 Re Vol Parts List [OCT Mounting | Adapter Exterior Assembly Interior Assembly Plate Ring | HALO a WIFI KEYPAD SMART LOCK Latch A For Latch / Strike For Lock Installation and User Guide Rilke oat Sadie A854 Required tools [ed CET CE — 8 Ruler Philips head screwdriver Wikileaks A6780 amg Batu sash 18003275625 Additional Tools {depending on application) wwwiwiksetcorm = ph bom Hammer ‘Wood block Chisel fats yur} Note: Additional door preparation may be required for doors with 11/2 G8 mm) holes.
Diameter is 21/8" (54mm) Adapter Ring Is required Adapter Ring Is not for installation, Install on needed for Installation Exterior Assembly. and may be discarded. & Remove the interior cover from the Interior assembly. Make sure tum piece shaft Is rotated as shown. It tun piece shaft is not oriented correctly, put the cover back on and Notate the plectrum as shown instep C. 'Q Do not install batteries until step.
= Note: The latch bolt will ably em retractile. Greta: Door handing was successful. Proceed to next step. Red: Door handing was unsuccessful Make sure the lock /N Ensure correct polarity. interior and battles are correctly For best results, use Installed. Perform step 58 again. new, non rechargeable 3 If the door handing process is Alkaline batteries only. \ still unsuccessful after a second attempt, see the Manual Door Handing section on page 4.
Reference Guide Smart Code at a Glance tool hole Tip: To light up the keypad while the door is locked, press the Lock button before entering your user code. The keypad will not light up if the door is unlocked. Button “A” System Alerts Interior (cover removed) Keypad flashes red once with Correctional code entered. Re-enter code. Batter Keypad ashes red three Beery ei hag naa No user code programmed.
