User's Manual

ManualsBrandsKYE Systems ManualsElectronicsERGOMEDIA 823 LASER

ENGLISH

Hardware Installation

1. Install two AA batteries each into the mouse and keyboard.

2. Plug in the USB receiver to a USB port of your PC.

3. Plug the Mic in & Speaker out connector to your PC.

4. Turn on your PC.

Software Installation

1. Place your CD driver in your PC drive for software installation.

2. Follow the instruction on the screen to finish the software installation.

3. For “HELP with the Genius driver, click on the icon found on the right

hand side of the screen.

Replace Batteries

1. If the keyboard does not work properly, then the batteries have lost their

charge, so please replace them.

2. If the mouse’s battery power is low, the power indicator will brighten

when you are moving the mouse.

Warning: Do not mix or use different types of batteries at the same time.

ID Channel Setting

The channel ID is factory preset. The green LED (data transmission indicator)

will be lit constantly when the wireless device is in normal operation. In case

your wireless devices do not work, please reset the ID channel by:

Summary of content (7 pages)

PAGE 1
ENGLISH Hardware Installation 1. 2. 3. 4. Install two AA batteries each into the mouse and keyboard. Plug in the USB receiver to a USB port of your PC. Plug the Mic in & Speaker out connector to your PC. Turn on your PC. Software Installation 1. 2. 3. Place your CD driver in your PC drive for software installation. Follow the instruction on the screen to finish the software installation. For “HELP with the Genius driver, click on the icon found on the right hand side of the screen. Replace Batteries 1.
PAGE 2
ENGLISH 1. Press the connect button on the receiver and the LED will be blinking for connection first; then, press the connect button of the wireless mouse. 2. Because wireless keyboard and mouse use different RF protocol, after your mouse is connected, you need to press the receiver connect button again, then press the keyboard connect button to finish the wireless keyboard and mouse connect procedure. Warning (Trouble shooting) 1.
PAGE 3
ENGLISH Remark 1. These buttons will not work unless the driver has been installed: Scrolling buttons/ left and right scrolling function/Zoom in & out/Messenger/Messenger status/Web cam/Photo Gallery/File Search/Blog/Add to my favorite/Word/Excel/Power Point. Mouse Factory Setting 1. 2. 3. 4. 5. 6. 7. 8. 9. Left Button: Provides traditional mouse functions such as click, double click and drag.
PAGE 4
ENGLISH Keyboard hot key definition NO Hot Key Description 01 Copy Activate copy function 02 Cut Activate cut function 03 Save Activate save function 04 Print Activate print function 05 Word Access to Word file 06 Excel Access to Excel file 07 Power Point Access to Power Point file 08 MCE Access to Media Center Start menu (MCE function works in Windows XP MCE Edition/ Vista Home Premium/ Vista Ultimate ONLY) 09 Photo gallery Open Photo Gallery folder 10 File search Search for
PAGE 5
ENGLISH 25 Stop Stop loading or refresh a web page 26 My Blog Activate MSN space or setup blog web site by users 27 Add to my favorite Add a web site to Internet Explorer favorite panel 28 My Favorite Open Internet Explorer favorite panel 29 Mail Active a default email program 30 My computer Open My computer path 31 Lock Activate the security lock function 32 Page up Rolling up the activated page 33 Scrolling Button Open activated applications 34 Page Down Rolling down the activ
PAGE 6
ENGLISH Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Different battery types and surrounding temperatures may affect the battery performance. Avoid using batteries in extremely cold environments as low temperatures can shorten the battery life and reduce wireless device performance.
PAGE 7
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.