User Manual

ENGLISH

Hardware Installation

1. Install two AA batteries in the mouse and two AA batteries in the

keyboard.

2. Plug in the USB receiver to a USB port of your PC.

3. Turn on your PC.

Software Installation

You can download the software from www.geniusnet.com. Go to Service

& Support and select “Drivers”. In Product Line, select “Keyboard &

Mouse combination”, then go to “Select Model” and select “TwinTouch

600”. Then select the OS you are using. Click on the file name to start the

download. Once you have downloaded the driver to your PC, click on the

file name to start the software installation. Just follow the instructions

shown on the screen to complete the installation.

Important Notice

1. Default hotkeys operate immediately when using Windows XP or

above.

2. When the mouse is in sleep mode (power saving mode), press any

button on the mouse to wake it up.

ID Channel Setting

The channel buttons are factory preset. The green LED, the data

transmissions indicator on the receiver will be lit when the keyboard or

mouse is in normal operation. If the keyboard / mouse do not work then

you have to reset the ID channel setting. Please press the connect button

on the receiver first and press the connect buttons under the mouse and

PAGE 1
ENGLISH Hardware Installation 1. 2. 3. Install two AA batteries in the mouse and two AA batteries in the keyboard. Plug in the USB receiver to a USB port of your PC. Turn on your PC. Software Installation You can download the software from www.geniusnet.com. Go to Service & Support and select “Drivers”. In Product Line, select “Keyboard & Mouse combination”, then go to “Select Model” and select “TwinTouch 600”. Then select the OS you are using. Click on the file name to start the download.
PAGE 2
ENGLISH keyboard within 20 seconds. Keyboard hot key definition Open browser in Netscape or IE. Open mail folder. Open the Windows calculator program. Remove the sound. Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Different battery types and surrounding temperatures may affect the battery performance.
PAGE 3
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.