User's Manual

ManualsBrandsKYE Systems ManualsElectronicsErgo 825 Laser - Dongle

ENGLISH

Hardware Installation

1. You can connect the receiver to a USB port of a PC or Notebook.

2. Install the enclosed two AA batteries as directed

3. Turn on your computer

4. The channel setting is factory preset. Please try on the mouse after

complete above procedures; if it is not working; Please re-connect by

pressing the button on the receiver first and observe for flash light and

press connect button underneath the mouse , then receiver will be lit and

off when connection is confirmed.

Software Installation

1. Make sure the mouse is connected to the computer

2. Place the setup disk (CD driver) into a DVD/CD Rom drive

3. Follow the instruction on the screen to complete the software installation

Summary of content (4 pages)

PAGE 1
ENGLISH Hardware Installation 1. You can connect the receiver to a USB port of a PC or Notebook. 2. Install the enclosed two AA batteries as directed 3. Turn on your computer 4. The channel setting is factory preset. Please try on the mouse after complete above procedures; if it is not working; Please re-connect by pressing the button on the receiver first and observe for flash light and press connect button underneath the mouse , then receiver will be lit and off when connection is confirmed.
PAGE 2
ENGLISH Warning (Trouble shooting) 1. Please do not use the wireless laser out on a desk that is made of glass or mirror 2. Although that the mouse has granted the eye safety certification, it is strongly suggested that a direct eye contact with the laser lens should be avoid. 3. The wireless laser mouser gives you free movement and an enjoyable wireless experience. For Optimal performance, place the receiver at least 8 inches (20cm) away from the mouse device. 4.
PAGE 3
ENGLISH 4. Left Button Provides traditional mouse functions such as click, double click and drag. 5. 6. Turbo roller button Provides quick roller- up Roller button/Middle button Scroll the button to surf the Internet and Windows documents. 7. 8. 9. Right button Provides traditional mouse click function Turbo roller button Provides quick roller down Battery low indicator The LED will be lit /flash when battery power is low.
PAGE 4
ENGLISH 10. FCC Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation. CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.