User Manual

ENGLISH
1
Hardware Installation
1. Install two AA batteries in the mouse and two AAA batteries in the
keyboard.
2. Plug in the USB receiver to a USB port of your PC.
3. Turn on your PC.
Software Installation
You can download the software from www.geniusnet.com. Go to Service &
Support and select “Drivers”. In Product Line, select “Keyboard & Mouse
combination”, then go to “Select Model” and select “KB 600”. Then select the
OS you are using. Click on the file name to start the download. Once you have
downloaded the driver to your PC, click on the file name to start the software
installation. Just follow the instructions shown on the screen to complete the
installation.
Important Notice
1. Default hotkeys operate immediately when using Windows XP or above.
2. When the mouse is in sleep mode (power saving mode), press any button
on the mouse to wake it up.
ID Channel Setting
The channel buttons are factory preset. The green LED, the data transmissions
indicator on the receiver will be lit when the keyboard or mouse is in normal
operation. If the keyboard / mouse do not work then you have to reset the ID
channel setting. Please press the connect button on the receiver first and press
the connect buttons under the mouse and keyboard within 20 seconds.

Summary of content (5 pages)