User Manual

ENGLISH

Federal Communications Commission (FCC) Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation. This equipment has been tested and found to comply

with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in particular installations, if this

equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

1. Reorient / Relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that the receiver is

connected.

4. Consult the dealer or an experienced radio / TV technician for help. CAUTION:

Changes or modifications not expressly approved by the manufacturer responsible

for compliance could void the user’s authority to operate the equipment.

CAUTION:

Any changes or modifications not expressly approved by the grantee of this

device couldvoid the user's authority to operate the equipment.

Disclaimer

The following does not apply to any country where such provisions are inconsistent

with local law: KYE Systems Corp. makes no warranties with respect to this

documentation, whether expressed or implied. All material is provided “as is”. This

includes, but is not limited to, any implied warranties of merchantability and fitness is

for a particular purpose. The information covered in this document is subject to

change without notice. KYE Systems Corp. assumes no responsibility for any errors

that may appear in this document. All brand names mentioned in this manual are

PAGE 1
ENGLISH Federal Communications Commission (FCC) Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 2
ENGLISH Hardware Installation 1. 2. 3. You can connect the receiver to a USB port of a PC Install AA battery in the mouse. Turn on your computer. The mouse will now work. Note: Class 1 Laser Product. Passed eye-safety regulation (IEC 60825-1) Warning: (Troubleshooting) 1. Please do not use wireless optical mouse on a desk which is made of glass, mirror, iron, or black velvet. Also, a flat surface is necessary or the optical sensor will be error easily.
PAGE 3
ENGLISH Factory Setting 1. 2. 3. Left Button: Provides traditional mouse functions like click, double click and drag. Right Button: Provides traditional mouse click functions. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows documents. Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: ■ Different battery types and surrounding temperatures may affect the battery performance.