User's Manual

English

Hardware Installation

Note: Supports Windows Vista/XP/2000

1. You can connect the receiver to a USB port of a PC.

2. Install One AA battery in the mouse.

3. Turn on your computer. The mouse can now work.

Warning: (Troubleshooting)

1. Do not use the wireless optical/laser mouse on a desk which is

made of glass or mirror.

2. The connection of the wireless device is factory preset, so when

you plug the USB receiver into any USB port, the connection

between the micro receiver and the mouse will be established

automatically.

3. In case your PC did not install the hardware successfully,

remove the micro receiver from the USB port and go Human

Interface Devices under Device Manager to remove the mouse

then plug in the micro receiver to a USB port again.

4. If you feel the mouse does not move smooth as usual, it is

possible the batteries have lost their charge so you need to

replace them. Remember to put the batteries in the correct

direction.

PAGE 1
English Hardware Installation Note: Supports Windows Vista/XP/2000 1. You can connect the receiver to a USB port of a PC. 2. Install One AA battery in the mouse. 3. Turn on your computer. The mouse can now work. Warning: (Troubleshooting) 1. Do not use the wireless optical/laser mouse on a desk which is made of glass or mirror. 2.
PAGE 2
English Factory Settings 1. Left Button: Provides traditional mouse functions like click, double click and drag. 2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows documents. 3. Right Button: Provides traditional mouse click functions. Note: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. (15.21) This device complies with part 15 of the FCC Rules.