User's Manual

ManualsBrandsKYE Systems ManualsComputers & AccessoriesEnergy Mouse

KYE SYSTEMS CORP.

English

Hardware Installation

For Mouse use:

Energy Mouse

Model:GM-120031/S

1. Connect the receiver to a USB port of a PC.

2. Make sure that you have switched on the power switch underneath the mouse.

For Mouse with power bank function charging:

1. How to start charge Energy Mouse

a. Plug the Micro USB cable into the Energy Mouse Micro USB port, and then

insert the other end of the cable into USB port of your power supply (e.g. wall

charger, or computer USB port). The power level LED indicators will be

flashing in sequence.

b. When the charge is completed, the four LEDs will stay on for 10 minutes, and

then turn off for power saving.

2. How to start charging mobile devices

a. Connect your device to the Energy Mouse USB output port.

b. Press and hold the button for two seconds to turn it on. The power level

LED indicators will flash three times and the charging will start.

c. To stop charging, press the button for two seconds again. Or just

disconnect the cable; Energy Mouse will automatically turn off in 30 seconds.

3. How to check power capacity of Energy Mouse

a. Press and hold button for two seconds for the power level. The four LEDs

will flash three times first then show the power capacity.

4. How to turn off Energy Mouse when charging is finished

a. Just remove the charger cable. Energy Mouse will

automatically turn off automatic off in 30 seconds.

Mouse Button Assignments

1. Left Button: Provides traditional mouse functions like click,

Summary of content (5 pages)

PAGE 1
English KYE SYSTEMS CORP. Hardware Installation For Mouse use: Energy Mouse Model:GM-120031/S 1. Connect the receiver to a USB port of a PC. 2. Make sure that you have switched on the power switch underneath the mouse. For Mouse with power bank function charging: 1. How to start charge Energy Mouse a. Plug the Micro USB cable into the Energy Mouse Micro USB port, and then insert the other end of the cable into USB port of your power supply (e.g. wall charger, or computer USB port).
PAGE 2
KYE SYSTEMS CORP. English double click and drag. 2. Magic-Roller: Press the “Magic-Roller” to surf the Internet and Windows documents. 3. Right Button: Provides traditional mouse click functions. 4. Button: Press and hold this button for two seconds to turn it on. The power level LED indicators will flash three times and the display battery’s capacity. 5. Power Level LED indicators: When the charge is completed, the four LEDs will stay on for 10 minutes, and then turn off for power saving.
PAGE 3
English KYE SYSTEMS CORP. Manager to remove the mouse, then plug in the micro receiver to a USB port again. 12. Energy Mouse can be use as a wire Mouse connect to PC directly. FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 4
English KYE SYSTEMS CORP. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 5
English KYE SYSTEMS CORP. Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased.