User's Manual

ManualsBrandsKYE Systems ManualsElectronicsSTYLISH 2.4GHz Wireless Dongle

STYLISH 2.4GHz Wireless Dongle SCM-4800

3. 2. 1.

■ Mouse Appearance:

＊ Mouse Body:

1. Right Key

2. Wheel Key

3. Left Key

4. Upper Cover Lock

5. RF Linking Button

6. Power Switch

＊ Dongle Body:

1. RF Linking Button

■ Set Up Process prior to Manually Use:

1. Un-Lock Battery Cover:

1-1. Un-Lock the Cover Lock of the Mouse Bottom-Cover

1-2. Lift-up the Top-Cover

1-3. Install 2*AAA Batteries

2. Get the Power-Switch Button moved to “ON” mode, and then Dongle will be

jumped out

3. Get the Dongle plugged into the USB port

4. Press the Linking Button of the Dongle

5. Then, press the Linking Button of the Mouse bottom for connection

Summary of content (3 pages)

PAGE 1
STYLISH 2.4GHz Wireless Dongle 3. 2. SCM-4800 1. 6. 5. 1. 4. ■ Mouse Appearance: ＊ Mouse Body: 1. Right Key 2. Wheel Key 3. Left Key 4. Upper Cover Lock 5. RF Linking Button 6. Power Switch ＊ Dongle Body: 1. RF Linking Button ■ Set Up Process prior to Manually Use: 1. Un-Lock Battery Cover: 1-1. Un-Lock the Cover Lock of the Mouse Bottom-Cover 1-2. Lift-up the Top-Cover 1-3. Install 2*AAA Batteries 2. Get the Power-Switch Button moved to “ON” mode, and then Dongle will be jumped out 3.
PAGE 2
■ For Power saving, please get your Mouse into sleep mode following by below steps: 1. Get your Mouse inactivity for 5 minutes, then Mouse is switched into sleep-mode automatically for saving the battery-power. 2. To wake up the Mouse by clicking either the right or left button-key, or shaking Mouse body. ■ Product Spec.： Resolution：Optical 1,000dpi Dimension：94.15 × 57.8 × 32.13 mm Weight：84.5 g USB Port：USB1.1 Power Spec：DV/ 5.0V +-0.5%, 100mA (Maximally) ■ Warning： 1.
PAGE 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.