User's Guide

Method 1: Pick up the two headsets from the charging base to power on and wait
for 10 seconds. The two headsets will now enter auto-pairing mode and connect
with each other after a few seconds. The headset (R) will blink red and blue and
prompt “pairing”. Then open the device’s Bluetooth configurations and select
“KYGO E7/900 – R”.
Method 2: On OFF state, press both MFB buttons for 2 seconds to power on and
wait for 10 seconds. The two headsets will now enter auto-pairing mode and
connect with each other after a few seconds. The headset (R) will blink red and
blue and prompt “pairing”. Then open the device’s Bluetooth configurations and
select “KYGO E7/900 – R”.
After the headset is successfully paired through method 1 or 2, the right headset
prompts “connected”.
The first time you pair with a new device the earbuds need to be positioned next by one another
before they can connect with eachother
Reconnect
Method 1: (if the headset was placed in the case without being turned off): Pick
up the headsets from the charging base to power on -> After a few seconds the
two headsets will automatically connect with each other -> the headset will pair
automatically with the most recently paired device within Bluetooth reach.
Method 2: (if the headset was turned off with the MFB before being put in the
case): Press and hold the MFB buttons for 2 seconds to power on -> After a
few seconds the two headsets will automatically connect with each other ->
the headset will pair automatically with the most recently paired device within
Bluetooth reach.
Note: When reconnecting the headset will prompt “connected”, “left channel”
and “right channel”. When it successfully connects to a device, the right headset
prompts “ connected”.
Adjusting the Volume
In call mode or music playing mode, short press MFB of headset(R) to increase
the volume; short press MFB of headset(L ) to reduce the volume.
Forward/Backward
In call mode or music playing mode;long press MFB of headset (R) for 2 seconds and release your
finger for going to next song.
Long press MFB of headset (L) for 2 second and release your finger for going to previous song.
Delete Pairing Records on the Headset
On OFFMODE state, press MFB button on both headset (L) and headset (R)
for 10 seconds (OFF MODE→ON MODE(2 seconds)→Delete pairing records (10
seconds), until hearing the Beep voice for 3 times, and the red/blue light flashes
twice at the same time.
Answering /Ending a Call Headset (R)