User Guide

ManualsBrandsKylaS ManualsSmart HomeZigbee Door and Window Sensor

Table Of Contents

EASY START GUIDE

SMART DOOR/WINDOW SENSOR

DRAFT

Summary of content (9 pages)

PAGE 1
SMART DOOR/WINDOW SENSOR EASY START GUIDE DRAFT
PAGE 2
Thank you for using Aztech KylaS product! Please keep this Easy Start Guide for future use. For support or help, visit kyla.aztech.com PACKAGE CONTENTS • Door/Window Sensor • Double-sided Tape • User Guide • Warranty Card • CR2032 Battery PRODUCT DESCRIPTION The Smart Door/Window Sensor can be installed on a door, window and any other open/close object. Working with Smart Zigbee Hub and Aztech KylaS App, it provides your home a security defense and creates scene with other devices.
PAGE 3
LED STATUS Red LED Blinks Once per Second Device is searching for network, or in pairing mode. NOTE: The battery standby time is approximately 8-12 months. OPERATION GUIDE Step 1: Download Aztech Kyla App from Google Play/ App Store and follow the setup guide on the app.
PAGE 4
Step 2: Login to Aztech KylaS App, then add “Smart Door/Window Sensor” to device list to enable the device. Step 3: Open the battery slot cover by turning it counterclockwise and insert the battery. The device will start up immediately.
PAGE 5
Step 4: Install the transmitter on a door frame, the magnet on the door or window. The magnet should be installed closer to the right side of the transmitter. Use double-sided tape to paste transmitter and magnet on the installation location.
PAGE 6
RESTORE DEFAULT SETTING Press the Reset button. The Red LED turns off means the sensor is disconnected from the Hub. Follow the setup guide on the app to pair with the Hub.
PAGE 7
TECHNICAL SPECIFICATIONS Power Supply 3V DC Battery Type CR2032 Operating Temperature -10~50°C Operating Humidity 10%–90% RH Sensor Type Reed Switch Connectivity Zigbee DRAFT Material of Housing PC and ABS, White Communication Distance 10m to Hub (indoor) Product Dimensions W 42 x H 69.
PAGE 9
FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.