User's Manual

This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.

KY.MAN.0105 (4.0) KY-LOC 1D.02.01 User Manual

Doc.- No.: KY.MAN.0105

Version: 4.0

Date: 17.05.2021

Page: 17 of 43

Figure 6: KY-LOC 1D.02.01 Mechanical Drawing (Left Side View)

Figure 7: KY-LOC 1D.02.01 Mechanical Drawing (Bottom View)

4.2 Mounting

The KY-LOC 1D.02.01 has 4 x M6x13 bolts (at the rear) for mounting purpose. Use only

stainless steel M6 DIN 985 nuts plus 6,4 mm washer according to:

• 1.4301 / AISI 304 / V2A (X5CrNi18/10) or

• 1.4571 / AISI 316 / V4A (X6CrNiMoTi17-12-2)

to mount the bracket.

For safety reasons only self-securing stainless-steel

nuts with a strength value of 12.9 shall be used.

The device can be mounted in any position, but the two devices need to have the same

orientation facing each other. It is recommended to install the KY-LOC 1D.02.01 with the

original KYMATI bracket (KY-XTRA M.01.01 – more information can be found under