User's Manual

This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
© - KYMATI GmbH – 2020
KY.MAN.0105 (4.0) KY-LOC 1D.02.01 User Manual
Doc.- No.: KY.MAN.0105
Version: 4.0
Date: 17.05.2021
Page: 18 of 43
If there is rain or similar situations where water can fill
the hole of the pressure valve it is not allowed to mount
the device with the pressure valve (see chapter 4.3) on
the top side.
The KY-LOC 1D.02.01 shall be mounted tightly so that it cannot be moved unintentionally.
A falling protection, part of KY-XTRA M.01.01, is
mandatory for the device to avoid any accidents or
damages. It is recommended to use one of the 4xM6
bolts on the back of the device.
Figure 8: Recommended KY-LOC 1D.02.01 mounting
Figure 9: Falling Protection