User's Manual

This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.
© - KYMATI GmbH – 2020
KY.MAN.0105 (4.0) KY-LOC 1D.02.01 User Manual
Doc.- No.: KY.MAN.0105
Version: 4.0
Date: 17.05.2021
Page: 19 of 43
4.3 Interfaces
A brief description of the interfaces is given below.
Figure 10: KY-LOC 1D.02.01 Physical Interfaces
(1) Plug for DC – IN / RS-485 (X1)
Power/RS-485 connector (X1) to power the device and to communicate via RS-485
See chapter 7.
(2) Ethernet (X2)
Ethernet connector (X2) to communicate with the device and to power the device via
PoE (802.11af). See chapter 7.
(3) Pressure Valve
The pressure valve ensures that temperature changes do not cause any water
ingression into the housing as well as prevents overpressure in case of heat.
(4) Power LED
(5) Status LED
(6)-(9) Information LEDs
All LEDs are described in chapter 4.6
Use connector covers if connectors are not used. The
specified IP rating is only given with connectors or
covers mounted.