User's Manual

This document is the property of KYMATI GmbH and must not be copied or disclosed without its written authorisation.

KY.MAN.0105 (4.0) KY-LOC 1D.02.01 User Manual

Doc.- No.: KY.MAN.0105

Version: 4.0

Date: 17.05.2021

Page: 39 of 43

If objects are in the line of sight it may be that the device measures a wrong distance or even

loose the contact and therefore also the synchronization totally. In the case of a total loss, the

synchronisation like the one at start-up will take place when the object is no longer in the line

of sight, which might affect the overall range performance and/or the measurement quality.

8.3 Simultaneous Operation

Adjacent KY-LOC 1D.02.01 systems must use of different channel configurations avoiding

interference between the different systems. It is in the responsibility of the system operator to

ensure that either adjacent KY-LOC 1D.02.01 systems make use of different channel

configurations or, when re-using the same channel configuration for different KY-LOC

1D.02.01 systems, an adequate spatial separation is kept between different KY-LOC 1D.02.01

systems. Currently the system supports up to 6 channels and in the future, this might increase

based on the customer needs (software upgrade).

Figure 18: Typical installation of multiple devices operating at the same area.