Operation Manual

3. OPERATION INSTRUCTIONS
(1) IGNITION SWITCH/STEERING
HANDLEBAR LOCK
：start the engine. The key cannot be taken out.
From this position, press and turn the key left, the seat
unlocked and the engine keep running..
:At this position, power is cut off and the engine stops.
The key can be taken out.
From this position, turn the key left, the seat unlocked.
:At this position, the steering handlebar is locked. The
key can be taken out
:To open the fuel fill cap,turn the key to the " "
position Make sure that the key is at the " " position
when starting the engine.
《Locking Method》
Turn the steering handlebar left to the full and then press
to turn the ignition switch key to " "position and the
handlebar is locked.
《Unlocking Method》
Turn the key to " " and the lock is released
automatically.
5
※CAUTION:
XAfter locking, turn the handlebar gently to make sure that it is
locked.
X Do not turn the ignition switch to " " during riding, other
wise the handlebar will be out of control and cause accidents.
X Don't park your motorcycle at a place to hinder the traffic.