User Guide

18. STARTING SYSTEM

18-0

__________________________________________________________________________________

STARTING SYSTEM

__________________________________________________________________________________

STARTING SYSTEM LAYOUT -------------------------------------- 18-1

SERVICE INFORMATION -------------------------------------------- 18-2

TROUBLESHOOTING ------------------------------------------------- 18-2

STARTER MOTOR ----------------------------------------------------- 18-3

STARTER RELAY INSPECTION ------------------------------------ 18-3

PAGE 1
8.
PAGE 2
18.
PAGE 3
18. STARTING SYSTEM SERVICE INFORMATION GENERAL INSTRUCTIONS • The removal of starter motor can be accomplished with the engine installed. • For the starter clutch removal, refer to page 7-14. • After the starter clutch is installed, be sure to add the engine oil and coolant and then bleed air from the cooling system. TORQUE VALUES Starter motor mounting bolt 0.7_ 1.
PAGE 4
18. STARTING SYSTEM STARTER MOTOR STARTER MOTOR REMOVAL Disconnect the starter motor cable. Remove the two bolts attaching the starter motor and remove the starter motor. The installation sequence is the reverse of removal. . Mounting Bolts Starter Motor Cable Starter Relay STARTER RELAY INSPECTION Remove the battery cover. Disconnect the starter relay coupler and then remove the starter relay.