User Guide

2. FRAME COVERS/EXHAUST MUFFLER
2-3
Seat Lock
Remove the fuel tank cap.
Remove the two seat attaching bolts and the
seat.
Remove the two bolts and two nuts attaching
the met-in box.
Remove the met-in box.
The installation sequence is the reverse of
removal.
Remove the two screws inside the frame
body cover on the joint between the floor
board and the frame body cover.
Disconnect the seat lock wire.
Remove the frame body cover.
FRAME CENTER COVER REMOVAL
Remove the two screws on the bottom of the
frame center cover.
Remove the frame center cover.
FRONT SIDE COVERS REMOVAL
Remove the front cover. (
!
2-4)
Remove the bolt and six screws attaching each
of the front right and left side covers.
Remove the front side covers by pulling them
outward.
The installation sequence is the reverse of
removal.
Nut
Seat
Frame Body Cover
Screws
Wire
Screws
Met-in Box
Screws
Nuts
Bolts
Frame Center Cover
Front Side Cover