User Guide

2. FRAME COVERS/EXHAUST MUFFLER
2-5
FLOOR BOARD REMOVAL
Remove the battery cover.
Remove the battery cables.
Remove the battery.
Remove the CDI unit.
Remove the rear right and left side covers.
(
!
2-2)
Remove the frame body cover. (
!
2-2)
Remove the front right and left side covers.
(
!
2-3)
Remove the four bolts attaching the floor
board.
Remove the screw on the bottom of the
battery case.
Remove the floor board.
The installation sequence is the reverse of
removal.
FRONT TOOL BOX REMOVAL
Remove the bolt attaching the front tool box.
Remove the front tool box.
The installation sequence is the reverse of
removal.
BOTTOM COVER REMOVAL
Remove the four bolts attaching the bottom
cover.
Remove the bottom cover.
The installation sequence is the reverse of
removal.
CDI Unit
Bottom Cover
Battery
Front Tool
Box
Floor Board
Bolts
Bolt
• When removing, first disconnect
the battery negative (-) cable and then
the positive (+) cable.
• When installing, first connect the
positive (+) cable and then the negative (-)
cable.
＊
When installing, the edge of the bottom
cover must be insert into the front side
covers.
＊
Bolts