User Guide

9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
9-13
CLUTCH ASS EMBLY
Install the damper rubbers on the drive plate
pins.
Install the clutch weights/shoes and clutch
springs onto the drive plate.
Install the retainer plate and secure with the
circlips.
CLUTCH/DRIVEN PULLEY AS SEMBLY
Clean the driven pulley faces and remove any
grease from them.
Install the oil seal onto the moveable driven
face.
Apply grease to the O-rings and install them
onto the moveable driven face.
Circlip
Oil Seal
Retainer Plate
Clutch Weights/Shoes
Drive Plate
Springs
Movable Driven Face