User Guide

9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
9-15
Install the clutch outer.
Hold the clutch outer with the universal
holder.
Install and tighten the clutch outer nut.
Torque: 5.5kg-m
Universal Holder
Install the drive belt. (
!
9-7)
Install the left crankcase cover. (
!
9-2)
KICK STARTER
REMOVAL
Remove the left crankcase cover. (
!
9-2)
Remove the seal rubber and dowel pins.
Remove the kick lever.
Remove the circlip and washer from the kick
starter spindle.
Gently turn the kick starter spindle to remove
the starter driven gear together with the
friction spring.
Universal Holder
Clutch Outer
Friction Spring
Kick Starter Spindle
Special
Circlip
Starter Driven Gear