User Guide

18. ONLY ATV ON ROAD AVAILABLE

18-0

MX’er 50

__________________________________________________________________________________

ONLY ATV ON ROAD AVAILABLE

__________________________________________________________________________________

INSTRUMENT ---------------------------------------------------------- 18- 1

INDICATOR LIGHT---------------------------------------------------- 18- 1

WINKER SWITCH/HORN --------------------------------------------- 18- 2

PAGE 1
8.
PAGE 2
18. ONLY ATV ON ROAD AVAILABLE MX’er 50 INSTRUMENT REMOVAL Remove the two instrument attaching screws. Disconnect the instrument. Screws Battery Cover Remove battery cover on instrument back to replace battery. °Ø After replace battery, the instrument will be reset. (Refer to owner’s manual) SENSOR WHEEL If the sensor is lost or wore, the speed will be not calculated on the instrument. INDICATOR LIGHT REMOVAL Remove the screw and disconnect the cover of the ignition switch.
PAGE 3
18. ONLY ATV ON ROAD AVAILABLE Remove the bulb socket and bulb. Check the bulb for damage and replace with a new one if necessary. MX’er 50 Bulb Socket INSTALLATION The installation sequence is the reverse of removal. Bulb Hazard Switch WINKER SWITCH Check for continuity between the wires indicated below. L Sky Orange Brown Blue °≥ °≥ R °≥ Color Position °≥ HORN SWITCH Check for continuity between the wires indicated below.