Operation Manual

PUSHING AND TRANSPORING THE SCOOTER
17
1. Please carefully read the safety information in
section 3 related to transportation first.
2. Pushing the scooter:
In order to push the scooter, you must place the scooter
in “freewheel” mode, which disengages the drive
motor.
The lever (1) is located at the bottom right-hand side of
the scooter under the seat.
WARNING!
When the lever is pulled up in freewheel mode:
 The scooter must be on a flat surface.
 Do not sit on the scooter.
6.1 To push the scooter:
= Freewheel
Mode (A):
(Motor is disengaged.)
1. Power off the scooter and
remove the key.
2. Pull the lever (1)
upwards as far as the stop
(see diagram A).
3. Push the scooter to your
desired location.
4. Push the lever (1)
downwards as far as the
stop (see diagram ).
=Driving
Mode(B):(Motor is engaged.)
1. Always switch the scooter off to push it.
2. Do not push the scooter too fast. If a pre-set
speed is exceeded while you are pushing the scooter,