Operation Manual

ADJUSTING THE SCOOTER
20
The following describes how to set up and adjust your
Scooter in order to have a comfortable and safe drive.
7.1 ADJUSTING THE DISTANCE BETWEEN
SEAT AND TILLER
1. Pull the seat locking
lever (1) upwards and
move the seat forwards or
backwards to the desired
position or distance.
2. Let go of the locking
lever and engage the
locking mechanism by
pushing the seat slightly
forwards and/or backwards.
Accident hazard
due to an
improperly locked seat:
Ensure that the seat is properly locked after adjustment;
if the seat is properly locked, it will not move when you
try pushing the seat slightly forwards and backwards.
7.2 SWIVELING THE SEAT TO GET ON AND
OFF
1. Lift the seat lever and rotate the seat to the side (left
or right) to get on.
2. Sit on the seat and turn the seat back to the
direction of travel. Lock the seat in place by releasing
the seat lever. Fasten your seat belt.
Ensure that the seat is properly engaged after
adjustment by seeing that the seat doesn’t move
when you try rotating it to either side.