Operation Manual

OPERATING THE SCOOTER
25
Check before you power on the scooter:
Ensure your scooter is in
drive mode (not in
“freewheel” mode)
Check the “freewheel”
mode lever is in the
pushed down position
Seat is locked into the
desirable position
Move the seat forwards
and backwards to ensure
it is stationary.
Are the batteries charged? Check the dashboard to
verify the charging status
of the batteries
Are the brakes working? Check by driving slowly
and stopping again
Are the tires and wheels
undamaged and is the air
pressure correct?
Visual check of tires and
wheels
8.1 POWERING ON/OFF
The switch is located near the right
side of the dashboard.
Insert the key into the switch and
turn it to the right to power on the
scooter.
Turn it to the left to power off the
scooter.
8.2 ADJUSTING THE SPEED
Use the two speed adjustment mechanisms to
adjust the speed to suit your driving conditions.
Always use lower speed if you are uncertain about the
driving conditions.
There are two mechanisms
to control the speed of your
scooter.
Speed Control Dial:
It is located in the center
of the dashboard.