Operation Manual

OPERATING THE SCOOTER

Do not pull both sides of the throttle control lever

simultaneously.

8.4 OVERLOAD PROTECTION

The overload protection switches the power off when the

motor becomes overloaded while trying to climb over

too high an obstacle, such as a curb or trying to climb

too steep of an incline.

If the motor is overloaded, the following happens:

• The scooter becomes noticeably slower and then stops

• The control system shuts down the scooter

To rectify this:

Switch the scooter off and allow it to cool down for a

few minutes.

Switch the scooter on and reverse away from the

obstacle (such as a curb) and then avoid the obstacle.

8.5 SWITCHING ON THE HORN

Press the horn button.

It will sound for as long as you hold the

button down.

8.6 SWITCHING ON THE TURN SIGNAL

Turn signal indicating a right hand turn =

Press the right arrow switch.

Turn signal indicating a left hand turn =

Press the left arrow switch.

When turning is completed, push the

switch again to turn the indicators off.