Operation Manual

3. Remove the oil drain plug (2) to drain the oil.

4. Reinstall the drain plug and tighten the drain plug to

specification.

5. Fill the engine with oil and install the oil fill cap.

6. Start the engine and let it idle for 2 3 minutes.

7. Stop the engine and check that the oil level is at the

upper level mark on the oil filler cap/dipstick with the

scooter upright on firm, level ground. Make sure there

are no oil leaks.

Running the engine with insufficient oil pressure may

cause serious engine damage.

Let the engine and exhaust system cool before working

in those areas.

Oil drain plug torque: 25 N-m (2.5 kgf-m, 18lbf-ft)

Oil capacity (after draining):

XCITING 500 AFI/XCITING 500:

2.0 liter (2.1 US qt, 1.8 lmp qt)

XCITING 250 AFI/XCITING 250:

0.9 liter (0.95 US qt, 0.8 lmp qt)

NOTE:

－

(2)