Operation Manual

58
MAINTENANCE
3. Remove the transmission fluid filler bolt 2, then slowly rotate
the rear wheel to drain the fluid. After the fluid has drained out,
reinstall the drain bolt with a new sealing washer and tighten it
to the specified torque.
22
22
2
22
22
2
Transmission fluid drain bolt torque: 15 lb-ft (20 N-m)
4. Fill the transmission with the recommend fluid to the capacity
listed below.
Transmission fluid type: SAE 90
Transmission fluid capacity
Xciting 500i or 500Ri: 0.48 qt (0.48 L)
Transmission fluid capacity
Xciting 250i or 250Ri: 0.2 qt (0.18 L)
Xciting 300i or 300Ri: 0.2 qt (0.18 L)
NOTE: Amounts are after draining the fluid, only.
5. Install the transmission filler bolt with a new sealing washer
and tighten it to the specified torque.
Transmission fluid filler bolt torque: 15 lb-ft (20 N-m)
250/300i & 250/300Ri models
500i & 500Ri models