Operation Manual
43
MAINTENANCE
Engine oil
Engine oil recommendation
Use a premium quality 4-stroke engine oil to ensure longer
service life of your scooter. Only use oils that have a SG rat-
ing per the API service classification.
Engine oil capacity: 0.95 qt (0.9 L)
Engine oil viscosity: SAE 15W-40
If this viscosity is not available, select an alternative engine
oil according to the chart shown below.
ENGINE OIL VISCOSITIES
Engine oil level inspection
Check the engine oil level each day before riding your scooter
NOTE: Park your scooter on the main stand, on level ground.
1. Start the engine and let it idle for a few minutes
2. Stop the engine and put the scooter on its center stand on
level ground
3. Unscrew the dip stick 4, remove it and wipe it with a clean
cloth
4. Reinsert the dip stick, slide it down until the threaded part
touches the engine case, but
do not thread it into the case.
5. Remove the dip stick and visually note the oil level on the
stick. The engine oil level should be above the "L" mark but
not higher than the "F" mark. Add or remove oil as required.
6. Reinstall the dip stick. Check for oil leaks.
F
L
44
44
4