Operation Manual

50
Transmission fluid change
The transmission fluid must be replaced periodically per the
service maintenance schedule (see pages 39 - 41).
MAINTENANCE
1. Place the scooter on its center stand.
2. Place a suitable container (drain pan) under the left trans-
mission case and remove the fluid drain bolt 1.
3. As the fluid is draining from the transmission, slowly rotate
the rear wheel to force all of the fluid from the transmission.
4. Install the drain bolt with a new sealing washer and tighten
it to the specified torque.
11
11
1
22
22
2
Transmission drain bolt torque: 9.5 lb-ft (13 N.m)
5. Fill the transmission with the recommended fluid to the speci-
fied capacity.
Transmission fluid type: SAE 90
Transmission fluid capacity: 0.2 qt (0.18 L)
NOTE: Amount is after draining the fluid, only.
6. Install the transmission filler bolt with a new sealing washer
and tighten it to the specified torque.
Transmission fluid filler bolt torque: 9.5 lb-ft (13 N-m)
Air cleaner filter element
Your scooter’s air cleaner filter element should be serviced at
regular intervals. Service the element more often when riding
in unusually wet or dusty areas.
1. Open seat (see page 22)
2. Remove the retaining band 3, the crankcase bolt 4
and the six screws 5 from the air cleaner cover 6.
33
33
3
44
44
4
55
55
5
66
66
6
55
55
5
55
55
5
55
55
5
55
55
5
55
55
5