Operation Manual

61
MAINTENANCE
Tire inspection
The condition of your scooter’s tires is vital for operational ef-
ficiency and your safety. Check the tires’ inflation pressure,
the tread depth, and look for damage before each ride.
1. Measure and adjust the tire pressure when the tires are
touching the ground (with no one seated on the scooter).
NOTE: Measure the pressure before riding, as the heat
generated during operation may cause improper readings.
Do not inflate the tires beyond 35.0 PSI ( 2.5 kg/cm
2
).
2. Inspect the tires for nails, screws and other objects 1 that
may be imbedded into the rubber.
11
11
1
3. Check the tread depth 2 at the wear indicator points 3. If
the tread is worn smooth at these points, the tire must
be replaced.
22
22
2
33
33
3
33
33
3
4. Check for damage 4 (blisters or cuts) in the side wall, or
for significant flat spots 5 on the tires’ tread. Replace the
tire immediately if any damage of this type is present.
44
44
4
44
44
4
55
55
5
NOTE: Check the tire’s tread before each ride. Replace
tires if the tread depth is less than the wear limit.
Tire tread wear limit: FRONT0.06 in (1.6 mm)
REAR 0.08 in (2.0 mm)