Data Sheet
General Note This datasheet does not give any information on product availability. The information given is just meant to describe the product and
is not to be considered as guaranteed characteristics in the legal sense. All products are subject to design changes in the interest of further
technical development. Copyright: KYOCERA AVX Components (Werne) GmbH (GER)
www.kyocera-avx.com
10/2021
Page 1 / 1
Rotary knob switches
Technical data
Switch resistance initial
value
≤ 25 mΩ
Capacity between two
contacts
≤ 3 p F
Switch resistance after 15
000 cycles
≤ 50 mΩ
Switching mode
Non shorting (white bottom
plate), shorting (black bottom
plate)
Insulation resistance
1 x 10
9
Ω
Number of wafers
1 / single wafer
Test voltage
1 kV- / 1 kV DC
Indexing angle
30°
Switching voltage
Max. 150 V DC / AC
Stops
Fixed or without stop
Switching current
Max. 130 mA, Ag plated
Operating torque
2 - 4.5 Ncm
Switching power
Max. 5 VA, Ag plated
Solder terminals
For printed circuit
Steady current at 20 °C
ambient temperature
3 A
Contact material
Silver plated copper alloy
Operating life at maximum
power
≥ 15 000 cycles
Insulation material
Plastic
Operating life no load
≥ 20 000 cycles
Switching combinations
(see page 2)
1 x 2 to 1 x 12; 2 x 2 to 2 x 6;
3 x 2 to 3 x 4; 4 x 2 to 4 x 3;
6 x 2
Serie 417
Type 417
Basic design: width 19.4 mm, operation by screwdriver