User's Manual Part 2

Printing Operation 2-13
Custom Mode (Windows Vista, Windows XP, Windows
2000 or Windows Server 2003)
Use Custom mode if you want to specify the printer port and select the
software to be installed.
For example, if you do not want fonts installed on your computer to be
replaced, select Custom Mode and deselect the Fonts checkbox in the
installation window.
1 Select Custom Mode and click "Next". (E.g.: For Windows Vista)
2 Following the instructions in the install wizard window, select the
software packages to be installed and the specify the port, etc.
For details, refer to "Custom Installation" in the printer driver
operation manual on the CD-ROM.
Installation on a Macintosh
1 Turn on the printer and the Macintosh.
2 Insert the included CD-ROM (Software Library) into the CD-ROM
drive.
3 Double-click the CD-ROM icon.
4 Double-click either OS 10.2 and Later or IS 9.x and Earlier
depending on your Mac OS version.
5 Double-click Kyocera OS X Japanese x.x or Kyocera Japanese
x.x. The printer driver installation software starts up.
6 Install the printer driver as directed by the instructions in the
installation software.