User's Manual

Connecting and Printing 3-3
Loading Software
Ensure the printer is plugged in and connected to the computer's parallel
or USB port before installing software from the CD-ROM.
1 Switch on the PC and activate Windows.
2 Insert the CD-ROM (Software Library) into the CD-ROM drive.
3 The installation program launches and the License Agreement
displays.
Select View License Agreement to read the information and select
Accept to proceed.
4 Select Install KX Driver and follow the on-screen instructions to
complete the software installation.
5 Once the installation is complete, the Printer Installed Successfully
dialog box displays.
Printing
This section explains the printing procedure from an application software.
You can specify the printing settings from each tab on KX Driver. KX Driver is
stored in the CD-ROM (Product Library). For more information, refer to the
KX Driver User Guide.
About KX Driver
KX Driver consists of the following tabs.
Basic
Use this tab to select the page size and orientation. The paper source is
also selected.
Layout
Use to select duplex or to create multiple pages on a single sheet of
paper. Also contains the scaling option.
Imaging
Select this tab to change the print quality, and the font or graphic
settings.
Publishing
Use to add covers or page inserts to your output. You can also produce a
set of transparencies with a blank or printed sheet interleaved using
Transparency Interleaving.
Advanced
Use to set up and add watermarks to your output. This tab incorporates
the PRESCRIBE commands into the document.
Note If the Welcome to the Found New Hardware Wizard
dialog box displays, select Cancel.
Note If the installation program fails to launch, use Windows
Explorer to access the CD-ROM and select Setup.exe.