User's Manual

Printing
3-6 OPERATION GUIDE
Loading Software
Ensure the printer is plugged in and connected to the PC before installing
the printer driver and the other utilities from the CD-ROM.
1
Switch on the PC and start Windows.
NOTE: When the printer is conncted to the PC with a USB cable, if the
Welcome to the Found New Hardware Wizard dialog box displays,
select Cancel.
2
Insert the CD-ROM supplied with the printer into the optical drive of the
computer.
3
The installation program starts.
NOTE: If the installation program fails to start, use Windows Explorer to
access the CD-ROM and double-click Setup.exe.
4
Perform the procedures displayed on the installation program to install the
KX Driver and the other utilities.