User's Manual

OPERATION GUIDE xvii
adequate space, especially around the vents, to allow air to be properly
ventilated out of the
printer.
Other Precautions
Adverse environmental conditions may affect the safe operation and
performance of the machine. Install in an air-conditioned room
(recommended room temperature: around 23°C, humidity: around 60%
RH), and avoid the following locations when selecting a site for the
machine.
• Avoid locations near a window or with exposure to direct sunlight.
• Avoid locations with vibrations.
• Avoid locations with drastic temperature fluctuations.
• Avoid locations with direct exposure to hot or cold air.
• Avoid poorly ventilated locations.
During printing, some ozone is released, but the amount does not cause
any ill effect to one's health. If, however, the printer is used over a long
period of time in a poorly ventilated room or when printing an extremely
large number of copies, the smell may become unpleasant. To maintain
the appropriate environment for print work, it is suggested that the room be
properly ventilated.
Left: 300mm
(11-13/16 inches)
Right: 250mm
(9-14/16 inches)
Rear: 300mm
(11-13/16 inches)
Front: 600mm
(23-5/8 inches)
Top: 400mm
(15-3/4 inches)