User's Manual

Loading Paper

OPERATION GUIDE 2-7

Packaging: Paper should be packed in a sturdy carton to protect it from

damage during transport. Quality paper obtained from a reputable supplier

is usually correctly packaged.

Special Paper

The following types of special paper can be used:

• Thin paper (60 to 64 g/m²)

• Thick paper (90 to 220 g/m²)

• Colored paper

• Recycled paper

• Overhead projector transparencies

• Cardstock

• Coated paper

• Envelopes

• Labels

Use paper that is sold specifically for use with copiers or printers (heat-

fusing type). When using transparencies, labels, envelopes, cardstock,

coated, or thick paper, feed the paper from the MP Tray.

Since the composition and quality of special paper vary considerably,

special paper is more likely than white bond paper to give trouble during

printing. No liability will be assumed if moisture and so forth given off during

printing on special paper causes harm to the machine or operator.

NOTE: Before purchasing any type of special paper, test a sample on the

machine and check that printing quality is satisfactory.

Transparency

This printer is available for monochorome printing on transparencies.

Transparencies must be fed to the MP Tray. One transparency can be

loaded at a time.

Transparencies must be able to withstand the heat of fusing during the

printing process. The recommended transparency product is 3M PP2500

(Letter, A4).